Securitron EMB-TDM User Manual download pdf (Page 2)

PN# 500-21950

Page 2 Rev. B, 05/11

3.2. BOLT THROUGH DOOR PREPARATION:

Figure 1 illustrates a section view of the through door mount (on a solid wood door). This

configuration may be used on solid wood doors, hollow or solid metal doors, or chalk filled *fire

doors.

*Note

: The Electro-Mechanical Bar may not be used on a fire rated door that requires

a fire rated latch! The EMB has no latch. Occasionally however, fire doors are

permitted on openings where a fire rated barrier is not required. Use of the EMB

should always be verified and approved through local building code and/or fire

prevention agencies.

Figure 1

Note

: Ensure that the two (2) end mount retainers and the (4) external tooth washers

provided with the EMB unit are used inside the end mount assemblies at each end of

the bar. These components will assure the most secure mount of the EMB to the door.

1 2

No comments

Securitron EMB-TDM User Manual Page 2